A-A-51187B
5.3 Warranty. Unless otherwise specified (see 7.3(t)), the manufacturer's standard commercial warranty, terms, and conditions shall apply.
6. PACKAGING. Unless otherwise specified (see 7.3(u)), preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES
7.1 Part or identification number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor.
AA51187 - X X X XXX
Size: Sizes are shown in tables I and II Style: A - 60 to 75 degrees
B - 90 degrees
C - 180 degrees (pencil style)
Class: 1 - Rigid neck
2 - Flexible neck
Type: A - Type I - Air cooled
B - Type II - Water cooled
CID number
7.2 Sources of documents.
7.2.1 FAR. The FAR may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402-0001.
7.2.2 CGA standards. Copies of CGA standards may be obtained from the Compressed Gas
Association, 1725 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202-4102.
7.2.3 RMA standards. Copies of RMA standards may be obtained from the Rubber
Manufacturers Association, 1400 K Street NW, Washington DC 20005.
7.3 Ordering data. Acquisition documents must specify the following:
a. CID document number, revision, and CID PIN. b. Type, class, style, and size as required (see 2). c. Torch dimensions, if different (see 3.1).
d. Gas valve, if required (see 3.2.2).
e. Electrode diameter(s) and length(s), as specified (see 3.2.3). f. Back cap length(s), as specified (see 3.2.3).
g. Collet(s), as specified (see 3.2.4).
h. Collet body, as specified (see 3.2.5).
i. Gas cup diameter(s), as specified (see 3.2.6).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business