A-A-55014A
7.2 Sources of documents.
7.2.1 Government documents. Copies of the FAR and commercial item descriptions may be
obtained from the U.S. Government Printing Office, Superintendent of Documents, Mail Stop:
SSOP, Washington, DC 20402-9328. Electronic copies of commercial item descriptions may be
obtained from https://astimage.daps.dla.mil/quicksearch/.
7.2.2 ASME standards. Copies of ASME standards may be obtained from the American Society
of Mechanical Engineers, 345 East 47th Street, New York, NY 10017.
7.2.3 CGA standards. Copies of CGA standards may be obtained from the Compressed Gas
Association, 1725 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202-4102.
7.2.4 RMA standards. Copies of RMA standards may be obtained from the Rubber
Manufacturers Association, 1400 K Street NW, Washington DC 20005.
7.3 Ordering data. Acquisition documents must specify the following:
a.
CID document number, revision, and CID PIN.
b.
Type and size required (see 2).
c.
Metric dimensions acceptable, if different (see 3.1).
d.
Power cable adapter, if different (see 3.2.2).
e.
Ground cable and clamp assembly, as specified (see 3.2.3).
f.
Pressure regulating system, if different (see 3.2.4).
g.
Gas types, if different (see 3.2.4).
h.
Pressure regulator, if different (see 3.2.4.1).
i.
Pressure gage range, if different (see 3.2.4.2).
j.
Flowmeter reading and gas calibration, if different (see 3.2.4.4).
k.
Flowmeter operating flow range, if different (see 3.2.4.4).
l.
Gas supply hose, if required (see 3.2.4.5).
m.
Gas supply hose length, if different (see 3.2.4.5).
n.
Type II torch cooling water circulator, if required (see 3.2.5).
o.
Type II torch cooling water circulator electrical power, if different (see 3.2.5).
p.
Type II torch water hoses, if required (see 3.2.5.1).
q.
Type II torch water hose length, if different (see 3.2.5.1).
r.
Type II torch overheating prevention device, as specified (see 3.2.5.2).
Optional accessories, as specified (see 3.2.6).
s.
t.
Replacement parts, as specified (see 3.2.7).
Brand name and part number of replacement part, as specified (see 3.2.7).
u.
v.
System of units required (see 3.3).
w.
Dual system of units, if required (see 3.3).
x.
Warranty, if different (see 5.3).
y.
Packaging requirements, if different (see 6).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business