MIL-W-80027D
A diagram of connections shall be attached
3.7 Diagram of connections.
to a readily accessible inside surface of the welding machines. The diagram
shall be protected by a coating of transparent varnish or other suitable
material.
3.8 Optional equipment. Optional equipment shall be furnished as spe-
cified and shall be fully described (see 6.2.1).
3.9 Repair parts.
Such repair parts as are specified (see 6.2.1), shall
be furnished.
3.10 Marking of instruction plates, indicating plates and nameplates.
All words on instruction and indicating plates shall be in the English lan-
guage. Characters shall be engraved, etched, embossed or stamped in bold-
face on a contrasting background.
Nameplate.
Unless otherwise specified (see 6.2.1), a nameplate
3.11
shall be securely attached to each welding machine.
The nameplate shall
If the welding machine is a special
contain the information listed below.
model, the model designation shall include the model of the basic standard
welding machine and a suffix identified in the manufacturer's permanent
The captions listed may be shortened or abbreviated, provided the
records.
entry for each caption is clear as to its identity.
Nomenclature
Manufacturers name
Manufacturer's model designation
Manufacturer's serial number
Power input (volts, total amps, phase, frequency)
Power output characteristics and ratings
Contract Number or Order Number
National Stock Number (NSN) or Plant Equipment Code (NSN preferred)
Date of manufacture
3.12 Technical data.
When technical data is required it shall be fur-
nished in accordance with the requirements of 6.2.2
Workmanship.
Workmanship of the welding machine and accessories
3.13
shall be of a quality equal to that of the manufacturer's commercial equip-
ment of the type specified herein.
4.
QUALITY ASSURANCE PROVISIONS
4.1
Responsibility for inspection.
Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the perform-
ance of all inspection requirements specified herein.
Except as otherwise
specified in the contract or purchase order, the contractor may use his own
or any other facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the Government. The
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business